#!/bin/bash # Copyright 2008, 2009, 2010, 2012, 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified 2012 by Eric Hameleers for ARM port. cd $(dirname $0) ; CWD=$(pwd) PKGNAM=samba VERSION=${VERSION:-$(echo samba-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1_slack15.0} # This option may be set to "heimdal" or "mit". # Upstream considers the use of MIT Kerberos for provisioning an AD DC # to be experimental (for now), and recommends using the bundled Heimdal. # Set here to MIT, since Slackware 15.0 shipped using that option. KERBEROS=${KERBEROS:-mit} if [ "$KERBEROS" = "mit" ]; then KERB_OPTIONS="--with-system-mitkrb5 --with-experimental-mit-ad-dc" elif [ "$KERBEROS" = "heimdal" ]; then # Please note that this perl module will be required: https://metacpan.org/pod/JSON KERB_OPTIONS="--bundled-libraries=heimdal" fi if [ -e $CWD/machine.conf ]; then . $CWD/machine.conf ] elif [ -e /etc/slackbuild/machine.conf ]; then . /etc/slackbuild/machine.conf ] else # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) export ARCH=i586 ;; arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: *) export ARCH=$( uname -m ) ;; esac fi # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: if [ "$ARCH" = "i586" ]; then SLKCFLAGS="-O2 -march=i586 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" else SLKCFLAGS="-O2" LIBDIRSUFFIX="" fi fi # If the variable PRINT_PACKAGE_NAME is set, then this script will report what # the name of the created package would be, and then exit. This information # could be useful to other scripts. if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" exit 0 fi case "$ARCH" in arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; *) TARGET=$ARCH-slackware-linux ;; esac NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} TMP=${TMP:-/tmp} PKG=$TMP/package-samba rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf samba-$VERSION tar xvf $CWD/samba-$VERSION.tar.?z || exit 1 cd samba-$VERSION || exit 1 # Add time.h to libsmbclient.h for ffmpeg compatibility: zcat $CWD/samba.libsmbclient.h.ffmpeg.compat.diff.gz | patch -p1 --verbose || exit 1 if [ ! -d source3/lib/cmdline ]; then ( cd source3/lib mkdir cmdline cd cmdline ln -sf ../../../source3/include/popt_common.h . ) fi chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \+ -o \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \+ # Choose correct options depending on whether PAM is installed: if [ -L /lib${LIBDIRSUFFIX}/libpam.so.? ]; then PAM_OPTIONS="--with-pam --with-pammodulesdir=/lib${LIBDIRSUFFIX}/security" unset SHADOW_OPTIONS else unset PAM_OPTIONS SHADOW_OPTIONS="--without-pam" fi # Some of these options could be auto-detected, but declaring them # here doesn't hurt and helps document what features we're trying to # build in. # # LDFLAGS are needed to avoid problems with missing symbols. LDFLAGS="-Wl,--no-as-needed" \ CFLAGS="$SLKCFLAGS" \ ./configure \ --enable-fhs \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --includedir=/usr/include \ --bindir=/usr/bin \ --sbindir=/usr/sbin \ --mandir=/usr/man \ --sysconfdir=/etc \ --with-configdir=/etc/samba \ --with-piddir=/var/run \ --with-privatedir=/var/lib/samba/private \ --with-privatelibdir=/usr/lib${LIBDIRSUFFIX} \ --with-modulesdir=/usr/lib${LIBDIRSUFFIX} \ --with-lockdir=/var/cache/samba \ --with-logfilebase=/var/log/samba \ --localstatedir=/var \ --enable-cups \ --with-acl-support \ --with-automount \ --with-quotas \ --with-syslog \ --with-utmp \ --with-winbind \ --with-ldap \ --with-ads \ --without-fam \ $KERB_OPTIONS \ $PAM_OPTIONS \ $SHADOW_OPTIONS \ --build=$TARGET || exit 1 # Gives errors: #--builtin-libraries=replace,ccan \ # Build with waf directly so that multiple jobs work. # Script lifted from "./configure". PREVPATH=$(dirname $0) WAF=./buildtools/bin/waf # using JOBS=1 gives maximum compatibility with # systems like AIX which have broken threading in python JOBS=$(echo $NUMJOBS | tr -dc '0-9') export JOBS # Make sure we don't have any library preloaded. unset LD_PRELOAD # Make sure we get stable hashes PYTHONHASHSEED=1 export PYTHONHASHSEED cd . || exit 1 ${PYTHON:=python3} $WAF build "$@" || exit 1 cd $PREVPATH mkdir -p \ $PKG/usr/doc/samba-$VERSION \ $PKG/var/spool/samba \ $PKG/var/log/samba \ $PKG/var/lib/samba/private \ $PKG/var/cache/samba chmod 700 $PKG/var/lib/samba/private chmod 1777 $PKG/var/spool/samba # Again, use waf directly to allow multithreading: #make install DESTDIR=$PKG || exit 1 DESTDIR=$PKG export DESTDIR ${PYTHON:=python3} $WAF install "$@" || exit 1 # Install the smbprint script: install -m0744 packaging/printing/smbprint $PKG/usr/bin/smbprint # Add a sample config file: cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample # Setup a default lmhosts file: echo "127.0.0.1 localhost" > $PKG/etc/samba/lmhosts.new if [ ! -r $PKG/usr/bin/smbget ]; then rm -f $PKG/usr/share/man/man1/smbget.1 fi # We'll add rc.samba to the init directory, but chmod 644 so that it doesn't # start by default: mkdir -p $PKG/etc/rc.d cat $CWD/rc.samba > $PKG/etc/rc.d/rc.samba.new chmod 644 $PKG/etc/rc.d/rc.samba.new mv $PKG/usr/share/man $PKG/usr gzip -9 $PKG/usr/man/man?/*.? find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # PAM related stuff we don't use: rm -r $PKG/usr/share/locale rm -f $PKG/usr/man/man8/pam* cp -a \ COPYING* MAINTAINERS Manifest PFIF.txt README* \ Read-Manifest-Now Roadmap WHATSNEW.txt docs examples \ $PKG/usr/doc/samba-$VERSION # These are installed elsewhere: rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \ $PKG/usr/doc/samba-$VERSION/docs/manpages # Empty now? rmdir $PKG/usr/doc/samba-$VERSION/docs 2> /dev/null # I'm sorry, but when all this info is included in HTML, adding 7MB worth of # PDF files just to have extra artwork is more fluff than I'll agree to. rm -f $PKG/usr/doc/samba-$VERSION/docs/*.pdf # Also redundant also: rm -rf $PKG/usr/doc/samba-$VERSION/docs/docbook mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat << EOF *** Be sure the package contains: drwxr-xr-x 2 root root 4096 May 3 15:46 /var/cache/samba/ drwx------ 2 root root 1024 Mar 12 13:21 /var/lib/samba/private drwxr-xr-x 2 root root 48 Aug 29 13:06 /var/log/samba/ drwxrwxrwt 2 root root 1024 Mar 12 13:21 /var/spool/samba/ EOF cd $PKG /sbin/makepkg -l y -c n $TMP/samba-$VERSION-$ARCH-$BUILD.txz