sacctmgr(1)

NAME
sacctmgr - Used to view and modify Slurm account information.

SYNOPSIS
sacctmgr [OPTIONS...] [COMMAND...]

DESCRIPTION
sacctmgr is used to view or modify Slurm account information. The account information is maintained within a database with the interface being provided by slurmdbd (Slurm Database daemon). This database can serve as a central storehouse of user and computer information for multiple computers at a single site. Slurm account information is recorded based upon four parameters that form what is referred to as an association. These parameters are user, cluster, partition, and account. user is the login name. cluster is the name of a Slurm managed cluster as specified by the ClusterName parameter in the slurm.conf configuration file. partition is the name of a Slurm partition on that cluster. account is the account for a job. The intended mode of operation is to initiate the sacctmgr command, add, delete, modify, and/or list association records then commit the changes and exit. NOTE: The contents of Slurm's database are maintained in lower case. This may result in some sacctmgr output differing from that of other Slurm commands.

OPTIONS

-s, --associations
    Use with show or list to display associations with the entity. This is equivalent to the associations command.

-h, --help
    Print a help message describing the usage of sacctmgr. This is equivalent to the help command.

-i, --immediate
    Commit changes immediately without asking for confirmation.

--json, --json=list, --json=<data_parser>
    Dump information as JSON using the default data_parser plugin or explicit data_parser with parameters. Sorting and formatting arguments will be ignored. This option is not available for every command.

-n, --noheader
    No header will be added to the beginning of the output.

-p, --parsable
    Output will be '|' delimited with a '|' at the end.

-P, --parsable2
    Output will be '|' delimited without a '|' at the end.

-Q, --quiet
    Print no messages other than error messages. This is equivalent to the quiet command.

-r, --readonly
    Makes it so the running sacctmgr cannot modify accounting information. The readonly option is for use within interactive mode.

--yaml, --yaml=list, --yaml=<data_parser>
    Dump information as YAML using the default data_parser plugin or explicit data_parser with parameters. Sorting and formatting arguments will be ignored. This option is not available for every command.

-v, --verbose
    Enable detailed logging. This is equivalent to the verbose command.

-V , --version
    Display version number. This is equivalent to the version command.

COMMANDS

add <ENTITY> <SPECS>
    Add an entity. Identical to the create command.

archive {dump|load} <SPECS>
    Write database information to a flat file or load information that has previously been written to a file.

clear stats
    Clear the server statistics.

create <ENTITY> <SPECS>
    Add an entity. Identical to the add command.

delete <ENTITY> where <SPECS>
    Delete the specified entities. Identical to the remove command.

dump <cluster>
    Dump cluster data to the specified file. If the filename is not specified it uses clustername.cfg filename by default.

help
    Display a description of sacctmgr options and commands.

list <ENTITY> [<SPECS>]
    Display information about the specified entity. By default, all entries are displayed, you can narrow results by specifying SPECS in your query. Identical to the show command.

load <FILENAME>
    Load cluster data from the specified file. This is a configuration file generated by running the sacctmgr dump command. This command does not load archive data, see the sacctmgr archive load option instead.

modify <ENTITY> where <SPECS> set <SPECS>
    Modify an entity.

ping
    Ping slurmdbd.

reconfigure
    Reconfigures the SlurmDBD if running with one.

remove <ENTITY> where <SPECS>
    Delete the specified entities. Identical to the delete command.

show <ENTITY> [<SPECS>]
    Display information about the specified entity. By default, all entries are displayed, you can narrow results by specifying SPECS in your query. Identical to the list command.

shutdown
    Shutdown the server.

version
    Display the version number of sacctmgr.

INTERACTIVE COMMANDS
NOTE: All commands listed below can be used in the interactive mode, but NOT on the initial command line.

exit
    Terminate sacctmgr interactive mode. Identical to the quit command.

quiet
    Print no messages other than error messages.

quit
    Terminate the execution of sacctmgr interactive mode. Identical to the exit command.

verbose
    Enable detailed logging. This includes time-stamps on data structures, record counts, etc. This is an independent command with no options meant for use in interactive mode.

!!  Repeat the last command.

ENTITIES

account
    An account, typically specified at job submit time using the --account= option. These may be arranged in a hierarchical fashion, for example accounts 'chemistry' and 'physics' may be children of the account 'science'. The hierarchy may have an arbitrary depth.

association
    The entity used to group information consisting of four parameters: account, cluster, partition (optional), and user. Used only with the list or show command. Add, modify, and delete should be done to a user, account or cluster entity, which will in turn update the underlying associations. Modification of attributes like limits is allowed for an association but not a modification of the four core attributes of an association. You cannot change the partition setting (or set one if it has not been set) for an existing association. Instead, you will need to create a new association with the partition included. You can either keep the previous association with no partition defined, or delete it. Note that these newly added associations are unique entities and any existing usage information will not be carried over to the new association.

cluster
    The ClusterName parameter in the slurm.conf configuration file, used to differentiate accounts on different machines.

configuration
    Used only with the list or show command to report current system configuration.

coordinator
    A special privileged user, usually an account manager, that can add users or sub-accounts to the account they are coordinator over. This should be a trusted person since they can change limits on account and user associations, as well as cancel, requeue or reassign accounts of jobs inside their realm.

event
    Events like downed or drained nodes on clusters. Note that this does not include transitory states like DRAINING.

federation
    A group of clusters that work together to schedule jobs.

job Used to modify specific fields of a job: Derived Exit Code, Comment, AdminComment, Extra, SystemComment, TRES, or WCKey.

problem
    Use with show or list to display entity problems.

qos Quality of Service.

reservation
    A collection of resources set apart for use by a particular account, user or group of users for a given period of time.

resource
    Software resources for the system. Those are software licenses shared among clusters.

RunawayJobs
    Used only with the list or show command to report current jobs that have been orphaned on the local cluster and are now runaway. If there are jobs in this state it will also give you an option to "fix" them. This sets the end time for each job to the latest of the job's start, eligible, and submit times, and sets the state to completed by default. Once corrected, this triggers the SlurmDBD to recalculate the usage from before the earliest submit time of all the runaway jobs. You must have an AdminLevel of at least Operator to perform this. NOTE: This operation could take a long time and sreport may not return data until the recalculation is complete. It is best to run this when the system is not busy.

stats
    Used with list or show command to view server statistics. Accepts optional argument of ave_time or total_time to sort on those fields. By default, sorts on increasing RPC count field.

transaction
    List of transactions that have occurred during a given time period.

tres
    Used with list or show command to view a list of Trackable RESources configured on the system.

user
    The login name. Usernames are case-insensitive (forced to lowercase) unless the PreserveCaseUser option has been set in the SlurmDBD configuration file.

wckeys
    Workload Characterization Key. An arbitrary string for grouping orthogonal accounts.

GENERAL SPECIFICATIONS FOR ASSOCIATION BASED ENTITIES
NOTE: The group limits (GrpJobs, GrpTRES, etc.) are tested when a job is being considered for being allocated resources. If starting a job would cause any of its group limit to be exceeded, that job will not be considered for scheduling even if that job might preempt other jobs which would release sufficient group resources for the pending job to be initiated. NOTE: TRES limit modifications of any kind using "+=" or "-=" syntax will always produce a value between 0 and 18446744073709551600. Trying to set a negative value using "-=" will set that TRES to 0, even if there was not a TRES limit present beforehand.

DefaultQOS=<default_qos>
    The QOS this association and its children will use by default if allowed in the QosLevel list mentioned below. This is overridden if set directly on a user. To clear an existing value, set a new value of -1.

Fairshare={<fairshare_number>|parent}
Share={<fairshare_number>|parent}
    Allocated shares used for fairshare calculation. Can also be the string parent, which is interpreted differently if set on a user or on an account. If set on a user, the parent association is used for fairshare. If set on an account, that account's children will be effectively re-parented for fairshare calculations to the first parent of their parent that is not Fairshare=parent. Limits remain the same, only its fairshare value is affected. To clear an existing value, set a new value of -1.

GrpJobs=<max_jobs>
    Maximum number of running jobs in aggregate for this association and its children. To clear an existing value, set a new value of -1.

GrpJobsAccrue=<max_jobs>
    Maximum number of pending jobs in aggregate able to accrue age priority for this association and its children. To clear an existing value, set a new value of -1.

GrpSubmit=<max_jobs>
GrpSubmitJobs=<max_jobs>
    Maximum number of jobs in a pending or running state at any time in aggregate for this association and its children. To clear an existing value, set a new value of -1.

GrpTRES=TRES[+|-]=<max_TRES>[,TRES[+|-]=<max_TRES>,...]
    Maximum number of TRES able to be allocated by running jobs in aggregate for this association and its children. Refer to the TRES information section below for further details.

GrpTRESMins=TRES[+|-]=<minutes>[,TRES[+|-]=<minutes>,...]
    Maximum number of TRES minutes that can possibly be used by past, present, and future jobs in this association and its children. Refer to the TRES information section below for further details. NOTE: This limit is not enforced if set on the root association of a cluster. So even though it may appear in sacctmgr output, it will not be enforced. NOTE: This limit only applies when using the Priority Multifactor plugin. The time is decayed using the value of PriorityDecayHalfLife or PriorityUsageResetPeriod as set in the slurm.conf. When this limit is reached all associated jobs running will be killed and all future jobs submitted with associations in the group will be delayed until they are able to run inside the limit.

GrpTRESRunMins=TRES[+|-]=<minutes>[,TRES[+|-]=<minutes>,...]
    Maximum number of TRES minutes able to be allocated by running jobs in this association and its children. This takes into consideration time limit of running jobs and consumes it. If the limit is reached no new jobs are started until other jobs finish to allow time to free up. Refer to the TRES information section below for further details.

GrpWall=<max_wall>
    Maximum wall clock time able to be allocated by running jobs in aggregate in this association and its children. GrpWall format is <min> or <min>:<sec> or <hr>:<min>:<sec> or <days>-<hr>:<min>:<sec> or <days>-<hr>. The value is recorded in minutes with rounding as needed. To clear an existing value, set a new value of -1. NOTE: Although it may appear in sacctmgr output, this limit will not be enforced if set on the root association of a cluster. NOTE: This limit only applies when using the Priority Multifactor plugin. The time is decayed using the value of PriorityDecayHalfLife or PriorityUsageResetPeriod as set in the slurm.conf. When this limit is reached all associated jobs running will be killed and all future jobs submitted with associations in the group will be delayed until they are able to run inside the limit.

MaxJobs=<max_jobs>
    Maximum number of running jobs per user in this association. This is overridden if set directly on a user. Default is the cluster's limit. To clear an existing value, set a new value of -1.

MaxJobsAccrue=<max_jobs>
    Maximum number of pending jobs able to accrue age priority at any given time in this association. This is overridden if set directly on a user. Default is the cluster's limit. To clear an existing value, set a new value of -1.

MaxSubmit=<max_jobs>
MaxSubmitJobs=<max_jobs>
    Maximum number of jobs in a pending or running state at any time in this association. Default is the cluster's limit. To clear an existing value, set a new value of -1.

MaxTRES=TRES[+|-]=<max_TRES>[,TRES[+|-]=<max_TRES>,...]
MaxTRESPJ=TRES[+|-]=<max_TRES>[,TRES[+|-]=<max_TRES>,...]
MaxTRESPerJob=TRES[+|-]=<max_TRES>[,TRES[+|-]=<max_TRES>,...]
    Maximum number of TRES each job can use in this association. This is overridden if set directly on a user. Default is the cluster's limit. Refer to the TRES information section below for further details.

MaxTRESMins=TRES[+|-]=<minutes>[,TRES[+|-]=<minutes>,...]
MaxTRESMinsPJ=TRES[+|-]=<minutes>[,TRES[+|-]=<minutes>,...]
MaxTRESMinsPerJob=TRES[+|-]=<minutes>[,TRES[+|-]=<minutes>,...]
    Maximum number of TRES minutes each job can use in this association. This is overridden if set directly on a user. Default is the cluster's limit. Refer to the TRES information section below for further details.

MaxTRESPN=TRES[+|-]=<max_TRES>[,TRES[+|-]=<max_TRES>,...]
MaxTRESPerNode=TRES[+|-]=<max_TRES>[,TRES[+|-]=<max_TRES>,...]
    Maximum number of TRES each node in a job allocation can use in this association. This is overridden if set directly on a user. Default is the cluster's limit. Refer to the TRES information section below for further details.

MaxWall=<max_wall>
MaxWallDurationPerJob=<max_wall>
    Maximum wall clock time each job can use in this association. This is overridden if set directly on a user. Default is the cluster's limit. MaxWall format is <min> or <min>:<sec> or <hr>:<min>:<sec> or <days>-<hr>:<min>:<sec> or <days>-<hr>. The value is recorded in minutes with rounding as needed. To clear an existing value, set a new value of -1. NOTE: Changing this value will have no effect on any running jobs, but may update the default time limit for pending jobs.

Priority
    Association priority factor to be used by the priority/multifactor plugin. This is overridden if set directly on a user. Unset by default, indicating that no extra priority is granted. To clear an existing value, set a new value of -1.

QosLevel<operator><comma_separated_list_of_qos_names>
    List of QOS names available to jobs running in this association. To get a list of valid QOSs use 'sacctmgr list qos'. This value will override its parents value and push down to its children as the new default. Setting a QosLevel to '' (two single quotes with nothing between them) restores its default setting. You can also use the operator += and -= to add or remove certain QOSs from the QOS list. Valid <operator> values include:

    =
        Set QosLevel to the specified value. NOTE: the QOS that can be used at a given account in the hierarchy are inherited by the children of that account. By assigning QOS with the = sign only the assigned QOS can be used by the account and its children.
    +=
        Add the specified <qos> value to the current QosLevel. The account will have access to this QOS and any others previously assigned to it.
    -=
        Remove the specified <qos> value from the current QosLevel.

See the EXAMPLES section below.

SPECIFICATIONS FOR ACCOUNTS

Accounts can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Accounts.

Cluster=<cluster>
    Specific cluster to add account to. Default is all in system.

Description=<description>
    An arbitrary string describing an account.

Flags=<flag>[,<flag>,...]
    Valid options are:

    NoUsersAreCoords
        Remove the privilege UsersAreCoords sets.

    UsersAreCoords
        If set, all users in this account will have the coordinator status here and of any sub-account in it's hierarchy.

Name=<name>
    The name of an account. Note the name must be unique and can not be represent different accounts at different points in the account hierarchy.

Organization=<org>
    Organization to which the account belongs.

Parent=<parent>
    Parent account of this account. Default is the root account, a top level account.

RawUsage=<value>
    This allows an administrator to reset the raw usage accrued to an account. The only value currently supported is 0 (zero). This is a settable specification only - it cannot be used as a filter to list accounts.

WithAssoc
    Display all associations for this account.

WithCoord
    Display all coordinators for this account.

WithDeleted
    Display information with previously deleted data. Accounts that are deleted within 24 hours of being created and did not have a job run in the account during that time will be removed from the database. Otherwise, the account will be marked as deleted and will be viewable with the WithDeleted flag.

NOTE: If using the WithAssoc option you can also query against association specific information to view only certain associations this account may have. These extra options can be found in the SPECIFICATIONS FOR ASSOCIATIONS section. You can also use the general specifications list above in the GENERAL SPECIFICATIONS FOR ASSOCIATION BASED ENTITIES section.

LIST/SHOW ACCOUNT FORMAT OPTIONS

Fields you can display when viewing Account records by using the format= option. The default format is:
Account,Description,Organization

Account
    The name of an account.

Description
    An arbitrary string describing an account.

Flags
    Flags set on the account.

Organization
    Organization to which the account belongs.

Coordinators
    List of users that are a coordinator of the account. (Only filled in when using the WithCoordinator option.)

NOTE: If using the WithAssoc option you can also view the information about the various associations the account may have on all the clusters in the system. The association information can be filtered. Note that all the accounts in the database will always be shown as filter only takes effect over the association data. The Association format fields are described in the LIST/SHOW ASSOCIATION FORMAT OPTIONS section.

SPECIFICATIONS FOR ASSOCIATIONS

Associations can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Associations.

Clusters=<cluster_name>[,<cluster_name>,...]
    List the associations of the cluster(s).

Accounts=<account_name>[,<account_name>,...]
    List the associations of the account(s).

Users=<user_name>[,<user_name>,...]
    List the associations of the user(s).

Partitions=<partition_name>[,<partition_name>,...]
    List the associations of the partition(s).

NOTE: Use Partitions="" or Partitions='' with no other names listed when specifying the case where there is no partition. This can be useful when using a command with an entity that has associations with and without partitions. If given in a shell where the quotes will be consumed then they must be quoted themselves. For example: Partitions=\"\".

NOTE: You can also use the general specifications list above in the GENERAL SPECIFICATIONS FOR ASSOCIATION BASED ENTITIES section.

Other options unique for listing associations:

OnlyDefaults
    Display only associations that are default associations

Tree
    Display account names in a hierarchical fashion.

WithDeleted
    Display information with previously deleted data. Associations that are deleted within 24 hours of being created and did not have a job run in the association during that time will be removed from the database. Otherwise, the association will be marked as deleted and will be viewable with the WithDeleted flag.

WithSubAccounts
    Display information with subaccounts. Only really valuable when used with the account= option. This will display all the subaccount associations along with the accounts listed in the option.

WOLimits
    Display information without limit information. This is for a smaller default format of "Cluster,Account,User,Partition".

WOPInfo
    Display information without parent information (i.e. parent id, and parent account name). This option also implicitly sets the WOPLimits option.

WOPLimits
    Display information without hierarchical parent limits (i.e. will only display limits where they are set instead of propagating them from the parent).

LIST/SHOW ASSOCIATION FORMAT OPTIONS

Fields you can display when viewing Association records by using the format= option.

Account
    The name of an account in the association.

Cluster
    The name of a cluster in the association.

DefaultQOS
    The QOS this association and its children will use by default if allowed in the QosLevel list mentioned below.

Fairshare
Share
    Allocated shares used for fairshare calculation. Can also be the string parent, which is interpreted differently if set on a user or on an account. If set on a user, the parent association is used for fairshare. If set on an account, that account's children will be effectively re-parented for fairshare calculations to the first parent of their parent that is not Fairshare=parent. Limits remain the same, only its fairshare value is affected.

Flags
    Flags set on the association.

GrpJobs
    Maximum number of running jobs in aggregate for this association and its children.

GrpJobsAccrue
    Maximum number of pending jobs in aggregate able to accrue age priority for this association and its children.

GrpSubmit
GrpSubmitJobs
    Maximum number of jobs in a pending or running state at any time in aggregate for this association and its children.

GrpTRES
    Maximum number of TRES able to be allocated by running jobs in aggregate for this association and its children.

GrpTRESMins
    Maximum number of TRES minutes that can possibly be used by past, present, and future jobs in this association and its children.

GrpTRESRunMins
    Maximum number of TRES minutes able to be allocated by running jobs in this association and its children. This takes into consideration time limit of running jobs and consumes it. If the limit is reached no new jobs are started until other jobs finish to allow time to free up.

GrpWall
    Maximum wall clock time able to be allocated by running jobs in aggregate in this association and its children.

ID  The id of the association.

Lineage
    Complete path up the hierarchy to the root association.

MaxJobs
    Maximum number of running jobs per user.

MaxJobsAccrue
    Maximum number of pending jobs able to accrue age priority at any given time.

MaxSubmit
MaxSubmitJobs
    Maximum number of jobs in a pending or running state at any time.

MaxTRES
MaxTRESPJ
MaxTRESPerJob
    Maximum number of TRES each job can use.

MaxTRESMins
MaxTRESMinsPJ
MaxTRESMinsPerJob
    Maximum number of TRES minutes each job can use.

MaxTRESPN
MaxTRESPerNode
    Maximum number of TRES each node in a job allocation can use.

MaxWall
MaxWallDurationPerJob
    Maximum wall clock time each job can use.

ParentID
    The association id of the parent of this association.

ParentName
    The account name of the parent of this association.

Partition
    The name of a partition in the association.

Priority
    Association priority factor to be used by the priority/multifactor plugin.

Qos Valid QOSs for this association.

QosRaw
    Numeric IDs of valid QOSs for this association.

User
    The name of a user in the association.

WithRawQOSLevel
    Display QosLevel in an unevaluated raw format, consisting of a comma-separated list of QOS names prepended with '' (nothing), '+' or '-' for the association. QOS names without +/- prepended were assigned (ie, sacctmgr modify ... set QosLevel=qos_name) for the entity listed or on one of its parents in the hierarchy. QOS names with +/- prepended indicate the QOS was added/filtered (ie, sacctmgr modify ... set QosLevel=[+-]qos_name) for the entity listed or on one of its parents in the hierarchy. Including WOPLimits will show exactly where each QOS was assigned, added or filtered in the hierarchy.

SPECIFICATIONS FOR CLUSTERS

Clusters can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Clusters.

Classification=<classification>
    Type of machine, current classifications are capability, capacity and capapacity.

Features[+|-]=<comma_separated_list_of_feature_names>
    Features that are specific to the cluster. Federated jobs can be directed to clusters that contain the job requested features. To add or remove individual features, use the += or -= operators. To clear all existing features, set a new value of '' (two single quotes with nothing between them).

Federation=<federation>
    The federation that this cluster should be a member of. A cluster can only be a member of one federation at a time.

FedState=<state>
    The state of the cluster in the federation.
    Valid states are:

    ACTIVE
        Cluster will actively accept and schedule federated jobs.

    INACTIVE
        Cluster will not schedule or accept any jobs.

    DRAIN
        Cluster will not accept any new jobs and will let existing federated jobs complete.

    DRAIN+REMOVE
        Cluster will not accept any new jobs and will remove itself from the federation once all federated jobs have completed. When removed from the federation, the cluster will accept jobs as a non-federated cluster.

Name=<name>
    The name of a cluster. This should be equal to the ClusterName parameter in the slurm.conf configuration file for some Slurm-managed cluster.

RPC=<rpc_list>
    Comma-separated list of numeric RPC values.

WithDeleted
    Display information with previously deleted data. Clusters that are deleted within 24 hours of being created and did not have a job run in the cluster during that time will be removed from the database. Otherwise, the cluster will be marked as deleted and will be viewable with the WithDeleted flag.

WithFed
    Appends federation related columns to default format options (e.g. Federation,ID,Features,FedState).

WOLimits
    Display information without limit information. This is for a smaller default format of Cluster,ControlHost,ControlPort,RPC

NOTE: You can also use the general specifications list above in the GENERAL SPECIFICATIONS FOR ASSOCIATION BASED ENTITIES section.

LIST/SHOW CLUSTER FORMAT OPTIONS

Fields you can display when viewing Cluster records by using the format= option.

Classification
    Type of machine, i.e. capability, capacity or capapacity.

Cluster
    The name of the cluster.

ControlHost
    When a slurmctld registers with the database the ip address of the controller is placed here.

ControlPort
    When a slurmctld registers with the database the port the controller is listening on is placed here.

Features
    The list of features on the cluster (if any).

Federation
    The name of the federation this cluster is a member of (if any).

FedState
    The state of the cluster in the federation (if a member of one).

FedStateRaw
    Numeric value of the name of the FedState.

Flags
    Attributes possessed by the cluster. Current flags include Cray, External and MultipleSlurmd. External clusters are registration only clusters. A slurmctld can designate an external slurmdbd with the AccountingStorageExternalHost slurm.conf option. This allows a slurmctld to register to an external slurmdbd so that clusters attached to the external slurmdbd can communicate with the external cluster with Slurm commands.

ID  The ID assigned to the cluster when a member of a federation. This ID uniquely identifies the cluster and its jobs in the federation.

NodeCount
    The current count of nodes associated with the cluster.

NodeNames
    The current Nodes associated with the cluster.

RPC When a slurmctld registers with the database the rpc version the controller is running is placed here.

TRES
    Trackable RESources (Billing, BB (Burst buffer), CPU, Energy, GRES, License, Memory, and Node) this cluster is accounting for.

NOTE: You can also view the information about the root association for the cluster. The Association format fields are described in the LIST/SHOW ASSOCIATION FORMAT OPTIONS section.

SPECIFICATIONS FOR COORDINATOR

Coordinators can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Coordinators.

Account=<account_name>[,<account_name>,...]
    Account name to add this user as a coordinator to.

Names=<user_name>[,<user_name>,...]
    Names of coordinators.

NOTE: To list coordinators use the WithCoordinator options with list account or list user.

SPECIFICATIONS FOR EVENTS

Events are automatically generated and sent to slurmdbd to be stored. These are options you can specify to filter for specific types of events.

All_Clusters
    Shortcut to get information on all clusters.

All_Time
    Shortcut to get time period for all time.

Clusters=<cluster_name>[,<cluster_name>,...]
    List the events of the cluster(s). Default is the cluster where the command was run.

CondFlags=<flag>[,<flag>,...]
    Optional list of flags to filter events by.
    Valid options are:

    Open
        If set, only open node events (currently down) will be returned.

End=<OPT>
    Period ending of events. Default is now.
    Valid time formats are:

    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

Event=<OPT>
    Specific types of events to look for. Valid options are Cluster or Node. The default is both.

MaxCPUs=<OPT>
    Max number of CPUs affected by an event.

MinCPUs=<OPT>
    Min number of CPUs affected by an event.

Nodes=<node_name>[,<node_name>,...]
    Node names affected by an event.

Reason=<reason>[,<reason>,...]
    Reason associated with a node going down. A reason that contains a space should be surrounded by quotes.

Start=<OPT>
    Period start of events. Default is 00:00:00 of previous day, unless states are given with the States=<spec> events. If this is the case the default behavior is to return events currently in the states specified.
    Valid time formats are:
    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

States=<state>[,<state>,...]
    State of a node in a node event. If this is set, the event type is set automatically to Node.

User=<user_name>[,<user_name>,...]
    Query against users who set the event. If this is set, the event type is set automatically to Node since only the slurm user can perform a cluster event.

LIST/SHOW EVENT FORMAT OPTIONS

Fields you can display when viewing Event records by using the format= option. The default format is:
Cluster,NodeName,TimeStart,TimeEnd,State,Reason,User

Cluster
    The name of the cluster event happened on.

ClusterNodes
    The hostlist of nodes on a cluster in a cluster event.

Duration
    Time period the event was around for.

End Period when event ended.

Event
    Name of the event.

EventRaw
    Numeric value of the name of the event.

NodeName
    The node affected by the event. In a cluster event, this is blank.

Reason
    The reason an event happened.

Start
    Period when event started.

State
    On a node event this is the formatted state of the node during the event.

StateRaw
    On a node event this is the numeric value of the state of the node during the event.

TRES
    Number of TRES involved with the event.

User
    On a node event this is the user who caused the event to happen.

SPECIFICATIONS FOR FEDERATION

Federations can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Federations.

Clusters[+|-]=<cluster_name>[,<cluster_name>,...]
    List of clusters to add/remove to a federation. A blank value (e.g. clusters=) will remove all federations for the federation. NOTE: A cluster can only be a member of one federation.

Name=<name>
    The name of the federation.

Tree
    Display federations in a hierarchical fashion.

WithDeleted
    Display information with previously deleted data. Federations that are deleted within 24 hours of being created will be removed from the database. Federations that were created more than 24 hours prior to the deletion request are just marked as deleted and will be viewable with the WithDeleted flag.

LIST/SHOW FEDERATION FORMAT OPTIONS

Fields you can display when viewing Federation records by using the format= option. The default format is:
Federation,Cluster,Features,FedState

Cluster
    Name of the cluster that is a member of the federation.

Features
    The list of features on the cluster.

Federation
    The name of the federation.

FedState
    The state of the cluster in the federation.

FedStateRaw
    Numeric value of the name of the FedState.

Index
    The index of the cluster in the federation.

SPECIFICATIONS FOR INSTANCES

Information about cloud node instances is sent to slurmdbd to be stored. These are options you can specify to filter for specific instances.

Clusters=<cluster_name>[,<cluster_name>,...]
    Name of the cluster that the instance ran on. Default is the cluster where the command was run.

End=<OPT>
    Period ending of instances. Default is now. Valid time formats are:
    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

Extra=<OPT>
    Arbitrary string associated with node during life of the instance.

InstanceId=<OPT>
    Cloud instance ID.

InstanceType=<OPT>
    Cloud instance type.

Nodes=<node_name>[,<node_name>,...]
    The node on which the instance ran.

Start=<OPT>
    Period start of instances. Default is 00:00:00 of previous day. Valid time formats are:
    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

LIST/SHOW INSTANCE FORMAT OPTIONS

Fields you can display when viewing Instance records by using the format= option. The default format is:
Cluster,NodeName,Start,End,InstanceID,InstanceType,Extra

Cluster
    Name of the cluster that the instance ran on.

End Time when instance ended.

Extra
    Arbitrary string associated with node during life of the instance.

InstanceId
    Cloud instance ID.

InstanceType
    Cloud instance type.

NodeName
    The node on which the instance ran.

Start
    Time when instance started.

SPECIFICATIONS FOR JOB

Job information is automatically sent to slurmdbd to be stored. These are options you can specify to filter for specific jobs. There are also some attributes you can modify for a job record.

AdminComment=<admin_comment>
    Arbitrary descriptive string. Can only be modified by a Slurm administrator. To clear an existing value, set a new value of '' (two single quotes with nothing between them).

Comment=<comment>
    The job's comment string when the AccountingStoreFlags parameter in the slurm.conf file contains 'job_comment'. The user can only modify the comment string of their own job. To clear an existing value, set a new value of '' (two single quotes with nothing between them).

Cluster=<cluster_list>
    List of clusters to alter jobs on, defaults to local cluster.

DerivedExitCode=<derived_exit_code>
    The derived exit code can be modified after a job completes based on the user's judgment of whether the job succeeded or failed. The user can only modify the derived exit code of their own job.

EndTime
    Jobs must end before this time to be modified. Format output is, YYYY-MM-DDTHH:MM:SS, unless changed through the SLURM_TIME_FORMAT environment variable.

Extra=<extra>
    The job's extra string when the AccountingStoreFlags parameter in the slurm.conf file contains 'job_extra'. The user can only modify the extra string of their own job. To clear an existing value, set a new value of '' (two single quotes with nothing between them).

JobID=<jobid_list>
    The id of the job to change. Not needed if altering multiple jobs using wckey specification.

NewWCKey=<new_wckey>
    Use to rename a wckey on job(s) in the accounting database

StartTime
    Jobs must start at or after this time to be modified in the same format as EndTime.

SystemComment=<system_comment>
    Arbitrary descriptive string, usually managed by the BurstBufferPlugin. Can only be modified by a Slurm administrator. To clear an existing value, set a new value of '' (two single quotes with nothing between them).

TRES=<tres_name=value>
    Use to set or modify a TRES on job(s) in the accounting database that have already completed. WARNING: This is permanent, the original value will be lost afterwards.

User=<user_list>
    Used to specify the jobs of users jobs to alter.

WCKey=<wckey_list>
    Used to specify the wckeys to alter.

The AdminComment, Comment, DerivedExitCode, Extra, SystemComment, and WCKey fields are the only fields of a job record in the database that can be modified after job completion.

LIST/SHOW JOB FORMAT OPTIONS
The sacct command is the exclusive command to display job records from the Slurm database.

SPECIFICATIONS FOR QOS

A QOS can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for a QOS. NOTE: The group limits (GrpJobs, GrpTRES, etc.) are tested when a job is being considered for being allocated resources. If starting a job would cause any of its group limit to be exceeded, that job will not be considered for scheduling even if that job might preempt other jobs which would release sufficient group resources for the pending job to be initiated. NOTE: All TRES options (GrpTRES, MaxTRES, etc.) can also use the same "[+|-]=" syntax available for association-based entities.

Description
    An arbitrary string describing a QOS. Can only be modified by a Slurm administrator.

Flags
    Used by the slurmctld to override or enforce certain characteristics. To add or remove individual flags, use the += or -= operators. To clear all existing flags, set a new value of -1.
    Valid options are

    DenyOnLimit
        If set, jobs using this QOS will be rejected at submission time if they do not conform to the QOS 'Max' or 'Min' limits as stand-alone jobs. Jobs that exceed these limits when other jobs are considered, but conform to the limits when considered individually will not be rejected. Instead they will pend until resources are available. Group limits (e.g. GrpTRES) will also be treated like 'Max' limits (e.g. MaxTRESPerNode) and jobs will be denied if they would violate the limit as stand-alone jobs. This currently only applies to QOS and Association limits.

    EnforceUsageThreshold
        If set, and the QOS also has a UsageThreshold, any jobs submitted with this QOS that fall below the UsageThreshold will be held until their Fairshare Usage goes above the Threshold.

    NoDecay
        If set, this QOS will not have its GrpTRESMins, GrpWall and UsageRaw decayed by the slurm.conf PriorityDecayHalfLife or PriorityUsageResetPeriod settings. This allows a QOS to provide aggregate limits that, once consumed, will not be replenished automatically. Such a QOS will act as a time-limited quota of resources for an association that has access to it. Account/user usage will still be decayed for associations using the QOS. The QOS GrpTRESMins and GrpWall limits can be increased or the QOS RawUsage value reset to 0 (zero) to again allow jobs submitted with this QOS to be queued (if DenyOnLimit is set) or run (pending with QOSGrp{TRES}MinutesLimit or QOSGrpWallLimit reasons, where {TRES} is some type of trackable resource).

    NoReserve
        If set and backfill scheduling is used, jobs using this QOS will not reserve resources in the backfill schedule's map of resources allocated through time. This flag is intended for use with a QOS that may be preempted by jobs associated with all other QOS (e.g use with a "standby" QOS). If this flag is used with a QOS which can not be preempted by all other QOS, it could result in starvation of larger jobs.

    OverPartQOS
        If set, jobs using this QOS will be able to override any limits used by the requested partition's QOS limits.

    PartitionMaxNodes
        If set, jobs using this QOS will be able to override the requested partition's MaxNodes limit.

    PartitionMinNodes
        If set, jobs using this QOS will be able to override the requested partition's MinNodes limit.

    PartitionTimeLimit
        If set, jobs using this QOS will be able to override the requested partition's TimeLimit.

    Relative
        If set, the QOS limits will be treated as percentages of the cluster or partition instead of absolute limits (numbers should be less than 100). The controller should be restarted or reconfigured after adding the Relative flag to the QOS.
        If this is used as a partition QOS:

        1. Limits will be calculated relative to the partition's resources.
        2. Only one partition may have this QOS as its partition QOS.
        3. Jobs will not be allowed to use it as a normal QOS.

    Additional details are in the QOS documentation at <https://slurm.schedmd.com/qos.html>.

    RequiresReservation
        If set, jobs using this QOS must designate a reservation when submitting a job. This option can be useful in restricting usage of a QOS that may have greater preemptive capability or additional resources to be allowed only within a reservation.

    UsageFactorSafe
        If set and AccountingStorageEnforce includes Safe, jobs will only be able to run if the job can run to completion with the UsageFactor applied.

GraceTime
    Preemption grace time in seconds to be extended to a job which has been selected for preemption. The default value is zero, meaning no preemption grace time is allowed on this QOS. This value is only applicable for QOS PreemptMode=CANCEL and PreemptMode=REQUEUE.

GrpJobs
    Maximum number of running jobs in aggregate for this QOS. To clear an existing value, set a new value of -1.

GrpJobsAccrue
    Maximum number of pending jobs in aggregate able to accrue age priority for this QOS. This limit only applies to the job's QOS and not the partition's QOS. To clear an existing value, set a new value of -1.

GrpSubmit
GrpSubmitJobs
    Maximum number of jobs in a pending or running state at any time in aggregate for this QOS. To clear an existing value, set a new value of -1.

GrpTRES
    Maximum number of TRES able to be allocated by running jobs in aggregate for this QOS. Refer to the TRES information section below for further details.

GrpTRESMins
    Maximum number of TRES minutes that can possibly be used by past, present, and future jobs with this QOS. Refer to the TRES information section below for further details. NOTE: This limit only applies when using the Priority Multifactor plugin. The time is decayed using the value of PriorityDecayHalfLife or PriorityUsageResetPeriod as set in the slurm.conf. When this limit is reached all associated jobs running will be killed and all future jobs submitted with this QOS will be delayed until they are able to run inside the limit.

GrpTRESRunMins
    Maximum number of TRES minutes able to be allocated by running jobs with this QOS. This takes into consideration time limit of running jobs and consumes it. If the limit is reached no new jobs are started until other jobs finish to allow time to free up. Refer to the TRES information section below for further details.

GrpWall
    Maximum wall clock time able to be allocated by running jobs in aggregate for this QOS. If this limit is reached, job submissions will be denied and the running jobs will be killed. GrpWall format is <min> or <min>:<sec> or <hr>:<min>:<sec> or <days>-<hr>:<min>:<sec> or <days>-<hr>. The value is recorded in minutes with rounding as needed. To clear an existing value, set a new value of -1. NOTE: This limit only applies when using the Priority Multifactor plugin. The time is decayed using the value of PriorityDecayHalfLife or PriorityUsageResetPeriod as set in the slurm.conf. When this limit is reached all associated jobs running will be killed and all future jobs submitted with this QOS will be delayed until they are able to run inside the limit.

LimitFactor
    A float that is factored into an association's [Grp|Max]TRES limits. For example, if the LimitFactor is 2, then an association with a GrpTRES of 30 CPUs, would be allowed to allocate 60 CPUs when running under this QOS. To clear an existing value, set a new value of -1. NOTE: This factor is only applied to associations running in this QOS and is not applied to any limits in the QOS itself.

MaxJobsAccruePA
MaxJobsAccruePerAccount
    Maximum number of pending jobs an account (or subacct) can have accruing age priority at any given time. This limit only applies to the job's QOS and not the partition's QOS. To clear an existing value, set a new value of -1.

MaxJobsAccruePU
MaxJobsAccruePerUser
    Maximum number of pending jobs a user can have accruing age priority at any given time. This limit only applies to the job's QOS and not the partition's QOS. To clear an existing value, set a new value of -1.

MaxJobsPA
MaxJobsPerAccount
    Maximum number of running jobs per account. To clear an existing value, set a new value of -1.

MaxJobsPU
MaxJobsPerUser
    Maximum number of running jobs per user. To clear an existing value, set a new value of -1.

MaxSubmitJobsPA
MaxSubmitJobsPerAccount
    Maximum number of jobs in a pending or running state per account. To clear an existing value, set a new value of -1.

MaxSubmitJobsPU
MaxSubmitJobsPerUser
    Maximum number of jobs in a pending or running state per user. To clear an existing value, set a new value of -1.

MaxTRES
MaxTRESPJ
MaxTRESPerJob
    Maximum number of TRES each job can use. Refer to the TRES information section below for further details.

MaxTRESMins
MaxTRESMinsPJ
MaxTRESMinsPerJob
    Maximum number of TRES minutes each job can use. Refer to the TRES information section below for further details.

MaxTRESPA
MaxTRESPerAccount
    Maximum number of TRES each account can use. Refer to the TRES information section below for further details.

MaxTRESPN
MaxTRESPerNode
    Maximum number of TRES each node in a job allocation can use. Refer to the TRES information section below for further details.

MaxTRESPU
MaxTRESPerUser
    Maximum number of TRES each user can use. Refer to the TRES information section below for further details.

MaxTRESRunMinsPA
MaxTRESRunMinsPerAccount
    Maximum number of TRES minutes each account can use. This takes into consideration the time limit of running jobs. If the limit is reached, no new jobs are started until other jobs finish to allow time to free up. Refer to the TRES information section below for further details.

MaxTRESRunMinsPU
MaxTRESRunMinsPerUser
    Maximum number of TRES minutes each user can use. This takes into consideration the time limit of running jobs. If the limit is reached, no new jobs are started until other jobs finish to allow time to free up. Refer to the TRES information section below for further details.

MaxWall
MaxWallDurationPerJob
    Maximum wall clock time each job can use. MaxWall format is <min> or <min>:<sec> or <hr>:<min>:<sec> or <days>-<hr>:<min>:<sec> or <days>-<hr>. The value is recorded in minutes with rounding as needed. To clear an existing value, set a new value of -1.

MinPrioThreshold
    Minimum priority required to reserve resources when scheduling. To clear an existing value, set a new value of -1.

MinTRES
MinTRESPerJob
    Minimum number of TRES each job running under this QOS must request. Otherwise the job will pend until modified. Refer to the TRES information section below for further details.

Name
    Name of the QOS. Needed for creation.

Preempt
    Other QOSs this QOS can preempt. To clear an existing value, set a new value of '' (two single quotes with nothing between them). NOTE: The Priority of a QOS is NOT related to QOS preemption, only Preempt is used to define which QOS can preempt others.

PreemptExemptTime
    Specifies a minimum run time for jobs in this QOS before they are considered for preemption. This QOS option takes precedence over the global PreemptExemptTime.
    Setting to -1 disables the option, allowing another QOS or the global option to take effect. Setting to 0 indicates no minimum run time and supersedes the lower priority QOS (see OverPartQOS) and/or the global option in slurm.conf.

PreemptMode
    Mechanism used to preempt jobs running in this QOS when the cluster's PreemptType is set to preempt/qos. This QOS-specific PreemptMode will override the cluster-wide PreemptMode for this QOS.
    See <https://slurm.schedmd.com/preempt.html> for more details. NOTE: For performance reasons, the backfill scheduler reserves whole nodes for jobs, not partial nodes. If during backfill scheduling a job preempts one or more other jobs, the whole nodes for those preempted jobs are reserved for the preemptor job, even if the preemptor job requested fewer resources than that. These reserved nodes aren't available to other jobs during that backfill cycle, even if the other jobs could fit on the nodes. Therefore, jobs may preempt more resources during a single backfill iteration than they requested.
    NOTE: For heterogeneous job to be considered for preemption all components must be eligible for preemption. When a heterogeneous job is to be preempted the first identified component of the job with the highest order PreemptMode (SUSPEND (highest), REQUEUE, CANCEL (lowest)) will be used to set the PreemptMode for all components. The GraceTime and user warning signal for each component of the heterogeneous job remain unique. Heterogeneous jobs are excluded from GANG scheduling operations.

    CLUSTER
        Is the default value and uses the cluster-wide PreemptMode for job preemption. A value of "OFF" or "" (empty string) is equivalent. To prevent jobs in this QOS from being preempted, ensure this QOS is not listed in the Preempt field of any other QOS.

    CANCEL
        The preempted job will be cancelled.

    REQUEUE
        Preempts jobs by requeuing them (if possible) or canceling them. For jobs to be requeued they must have the --requeue sbatch option set or the cluster wide JobRequeue parameter in slurm.conf must be set to 1.

    SUSPEND
        The preempted jobs will be suspended, and later the Gang scheduler will resume them. Therefore the SUSPEND preemption mode always needs the GANG option to be specified at the cluster level. Also, because the suspended jobs will still use memory on the allocated nodes, Slurm needs to be able to track memory resources to be able to suspend jobs.
        If PreemptType=preempt/qos is configured and if the preempted job(s) and the preemptor job are on the same partition, then they will share resources with the Gang scheduler (time-slicing). If not (i.e. if the preemptees and preemptor are on different partitions) then the preempted jobs will remain suspended until the preemptor ends. NOTE: Suspended jobs will not release GRES. Higher priority jobs will not be able to preempt to gain access to GRES.

    PRIORITY
        Allow preemption only if the preemptor's job priority is higher than the preemptee's job priority.

    WITHIN
        Allows for preemption between jobs sharing the same qos. By default, PreemptType=preempt/qos will only consider jobs to be eligible for preemption if they do not share the same qos value.

Priority
    QOS priority factor to be used by the priority/multifactor plugin. Unset by default, indicating that no extra priority is granted. NOTE: The Priority of a QOS is NOT related to QOS preemption, see Preempt instead.

RawUsage=<value>
    This allows an administrator to set the raw usage accrued to a QOS. Specifying a value of 0 (zero) will reset the raw usage. This is a settable specification only - it cannot be used as a filter to list accounts.

UsageFactor
    A float that is factored into a job's TRES usage (e.g. RawUsage, TRESMins, TRESRunMins). For example, if the usagefactor was 2, for every TRESBillingUnit second a job ran it would count for 2. If the usagefactor was .5, every second would only count for half of the time. A setting of 0 would add no timed usage from the job. The usage factor only applies to the job's QOS and not the partition QOS. If the UsageFactorSafe flag is set and AccountingStorageEnforce includes Safe, jobs will only be started if they can run to completion with the UsageFactor applied, and won't be killed due to limits. If the UsageFactorSafe flag is not set and AccountingStorageEnforce includes Safe, jobs will be started if they can run to completion without the UsageFactor applied, and won't be killed due to limits. If the UsageFactorSafe flag is not set and AccountingStorageEnforce does not include Safe, jobs will be scheduled as long as the limits are not reached, but could be killed due to limits. See AccountingStorageEnforce in slurm.conf man page. Default is 1. To clear an existing value, set a new value of -1.

UsageThreshold
    A float representing the lowest fairshare of an association allowed to run a job. If an association falls below this threshold and has pending jobs or submits new jobs those jobs will be held until the usage goes back above the threshold. Use sshare to see current shares on the system. To clear an existing value, set a new value of -1.

LIST/SHOW QOS FORMAT OPTIONS

Fields you can display when viewing QOS records by using the format= option.

Description
    An arbitrary string describing a QOS.

Flags
    Used by the slurmctld to override or enforce certain characteristics.

GraceTime
    Preemption grace time to be extended to a job which has been selected for preemption in the format of hh:mm:ss.

GrpJobs
    Maximum number of running jobs in aggregate for this QOS.

GrpJobsAccrue
    Maximum number of pending jobs in aggregate able to accrue age priority for this QOS. This limit only applies to the job's QOS and not the partition's QOS.

GrpSubmit
GrpSubmitJobs
    Maximum number of jobs in a pending or running state at any time in aggregate for this QOS.

GrpTRES
    Maximum number of TRES able to be allocated by running jobs in aggregate for this QOS.

GrpTRESMins
    Maximum number of TRES minutes that can possibly be used by past, present, and future jobs with this QOS.

GrpTRESRunMins
    Maximum number of TRES minutes able to be allocated by running jobs with this QOS.

GrpWall
    Maximum wall clock time able to be allocated by running jobs in aggregate for this QOS.

ID  The id of the QOS.

LimitFactor
    A float that is factored into an association's [Grp|Max]TRES limits.

MaxJobsAccruePA
MaxJobsAccruePerAccount
    Maximum number of pending jobs an account (or subacct) can have accruing age priority at any given time. This limit only applies to the job's QOS and not the partition's QOS.

MaxJobsAccruePU
MaxJobsAccruePerUser
    Maximum number of pending jobs a user can have accruing age priority at any given time. This limit only applies to the job's QOS and not the partition's QOS.

MaxJobsPA
MaxJobsPerAccount
    Maximum number of running jobs per account.

MaxJobsPU
MaxJobsPerUser
    Maximum number of running jobs per user.

MaxSubmitJobsPA
MaxSubmitJobsPerAccount
    Maximum number of jobs in a pending or running state per account.

MaxSubmitJobsPU
MaxSubmitJobsPerUser
    Maximum number of jobs in a pending or running state per user.

MaxTRES
MaxTRESPJ
MaxTRESPerJob
    Maximum number of TRES each job can use.

MaxTRESMins
MaxTRESMinsPJ
MaxTRESMinsPerJob
    Maximum number of TRES minutes each job can use.

MaxTRESPA
MaxTRESPerAccount
    Maximum number of TRES each account can use.

MaxTRESPN
MaxTRESPerNode
    Maximum number of TRES each node in a job allocation can use.

MaxTRESPU
MaxTRESPerUser
    Maximum number of TRES each user can use.

MaxTRESRunMinsPA
MaxTRESRunMinsPerAccount
    Maximum number of TRES minutes each account can use.

MaxTRESRunMinsPU
MaxTRESRunMinsPerUser
    Maximum number of TRES minutes each user can use.

MaxWall
MaxWallDurationPerJob
    Maximum wall clock time each job can use.

MinPrioThreshold
    Minimum priority required to reserve resources when scheduling.

MinTRES
    Minimum number of TRES each job running under this QOS must request. Otherwise the job will pend until modified.

Name
    Name of the QOS.

Preempt
    Other QOSs this QOS can preempt.

PreemptExemptTime
    Specifies a minimum run time for jobs in this QOS before they are considered for preemption.

PreemptMode
    Mechanism used to preempt jobs or enable gang scheduling for this QOS when the cluster's PreemptType is set to preempt/qos. The default preemption mechanism is specified by the cluster-wide PreemptMode configuration parameter.

Priority
    QOS priority factor to be used by the priority/multifactor plugin.

UsageFactor
    A float that is factored into a job's TRES usage (e.g. RawUsage, TRESMins, TRESRunMins).

UsageThreshold
    A float representing the lowest fairshare of an association allowed to run a job.

WithDeleted
    Display information with previously deleted data. A QOS that is deleted within 24 hours of being created and did not have a job run in the QOS during that time will be removed from the database. Otherwise, the QOS will be marked as deleted and will be viewable with the WithDeleted flag.

SPECIFICATIONS FOR RESERVATIONS

Reservations are created with the scontrol command and information about the reservations is sent to slurmdbd to be stored. These are options you can specify to filter for specific reservations.

Clusters=<cluster_name>[,<cluster_name>,...]
    List the reservations of the cluster(s). Default is the cluster where the command was run.

End=<OPT>
    Period ending of reservations. Default is now. Valid time formats are:
    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

ID=<OPT>
    Comma-separated list of reservation ids.

Names=<OPT>
    Comma-separated list of reservation names.

Nodes=<node_name>[,<node_name>,...]
    Node names where reservation ran.

Start=<OPT>
    Period start of reservations. Default is 00:00:00 of previous day. Valid time formats are:
    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

LIST/SHOW RESERVATION FORMAT OPTIONS

Fields you can display when viewing Reservation records by using the format= option. The default format is:
Cluster,Name,TRES,Start,End,UnusedWall

Associations
    The id's of the associations able to run in the reservation.

Cluster
    Name of cluster reservation was on.

End End time of reservation.

Flags
    Flags set on the reservation.

ID  Reservation ID.

Name
    Name of this reservation.

NodeNames
    List of nodes in the reservation.

Start
    Start time of reservation.

TRES
    List of TRES in the reservation.

UnusedWall
    Wall clock time in seconds unused by any job. A job's allocated usage is its run time multiplied by the ratio of its CPUs to the total number of CPUs in the reservation. For example, a job using all the CPUs in the reservation running for 1 minute would reduce unused_wall by 1 minute.

SPECIFICATIONS FOR RESOURCE

Resources can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Resources.

LastConsumed=<OPT>
    Number of software resources of a specific name consumed out of Count on the system being controlled by a resource manager.

Clusters=<name_list>
    Comma-separated list of cluster names on which specified resources are to be available. If no names are designated then the clusters already allowed to use this resource will be altered.

Count=<OPT>
    Number of software resources of a specific name configured on the system being controlled by a resource manager.

Descriptions=
    A brief description of the resource.

Flags[-|+]=<OPT>
    Flags that identify specific attributes of the system resource.
    Valid options are

    Absolute
        If set the resource will treat the counts for Allowed and Allocated as absolute counts instead of percentages. NOTE: If removing this with flags-=absolute there is no effort to convert the numbers in the database back to percentages. This is required by the user.

    SharedPool
        Allows each cluster to access the full resource pool without requiring a value to be exclusively allocated to each cluster. Requires each cluster's Allowed to be 0 or the full Count/100% (with/without Absolute).

Names=<OPT>
    Comma-separated list of the name of a resource configured on the system being controlled by a resource manager. If this resource is seen on the slurmctld its name will be name@server to distinguish it from local resources defined in a slurm.conf. Resource names are case-insensitive (forced to lowercase) unless the Parameters=PreserveCaseResource option has been set in slurmdbd.conf.

Allowed=<allowed>
    Percentage/Count of a specific resource that can be used on specified cluster.

Server=<OPT>
    Arbitrary string indicating the name of the server serving up the resource. Default is 'slurmdb' indicating the licenses are being served by the database. This parameter is only for tagging purposes.

ServerType=<OPT>
    Arbitrary string used to tag the type of the software resource manager providing the licenses. For example FlexNext Publisher Flexlm license server or Reprise License Manager RLM. This does not imply any kind of integration with license managers.

Type=<OPT>
    The type of the resource represented by this record. Currently the only valid type is License.

WithClusters
    Display the clusters percentage/count of resources. If a resource hasn't been given to a cluster the resource will not be displayed with this flag.

WithDeleted
    Display information with previously deleted data. Resources that are deleted within 24 hours of being created will be removed from the database. Resources that were created more than 24 hours prior to the deletion request are just marked as deleted and will be viewable with the WithDeleted flag.

NOTE: Resource is used to define each resource configured on a system available for usage by Slurm clusters.

LIST/SHOW RESOURCE FORMAT OPTIONS

Fields you can display when viewing Resource records by using the format= option. The default format is:
Name,Server,Type,Count,LastConsumed,Allocated,ServerType,Flags

Allocated
    The percent/count of licenses allocated to a cluster.

LastConsumed
    The count of a specific resource consumed out of Count on the system globally.

Cluster
    Name of cluster resource is given to.

Count
    The count of a specific resource configured on the system globally.

Description
    Description of the resource.

Name
    Name of this resource.

Server
    Server serving up the resource.

ServerType
    The type of the server controlling the licenses.

Type
    Type of resource this record represents.

SPECIFICATIONS FOR RUNAWAYJOB

Under certain circumstances, jobs can complete without having that completion recorded by slurmdbd. This results in a "runaway job", where slurmdbd is not going to record a completion time for that job without intervention. This command will identify jobs that are in this state and offer to have slurmdbd clean up the job record(s). This particular variant of the "show" command also permits the use of the "set" keyword to define the following specifications:

EndState=<state>
    Desired state to use as the end state for fixed jobs. Supported states are: Completed, Failed.

LIST/SHOW RUNAWAYJOB FORMAT OPTIONS

Fields you can display when viewing runaway job records by using the format= option. The default format is:
ID,Name,Partition,Cluster,State,TimeSubmit,TimeStart,TimeEnd

Cluster
    Name of cluster job ran on.

ID  Id of the job.

Name
    Name of the job.

Partition
    Partition job ran on.

State
    Current State of the job in the database.

TimeEnd
    Current recorded time of the end of the job.

TimeStart
    Time job started running.

TimeSubmit
    Time job was submitted.

SPECIFICATIONS FOR TRANSACTIONS

Information about changes to clusters, resources, accounts, associations, etc., are recorded as transactions by slurmdbd. These are options you can specify to filter for specific transactions.

Accounts=<account_name>[,<account_name>,...]
    Only print out the transactions affecting specified accounts.

Action=<Specific_action_the_list_will_display>
    Only display transactions of the specified action type.

Actor=<Specific_name_the_list_will_display>
    Only display transactions done by a certain person.

Clusters=<cluster_name>[,<cluster_name>,...]
    Only print out the transactions affecting specified clusters.

End=<Date_and_time_of_last_transaction_to_return>
    Return all transactions before this Date and time. Default is now.

Start=<Date_and_time_of_first_transaction_to_return>
    Return all transactions after this Date and time. Default is epoch. Valid time formats for End and Start are:
    HH:MM[:SS] [AM|PM]
    MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
    MM/DD[/YY]-HH:MM[:SS]
    YYYY-MM-DD[THH:MM[:SS]]
    now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

Users=<user_name>[,<user_name>,...]
    Only print out the transactions affecting specified users.

WithAssoc
    Get information about which associations were affected by the transactions.

LIST/SHOW TRANSACTIONS FORMAT OPTIONS

Fields you can display when viewing Transaction records by using the format= option. The default format is:
Time,Action,Actor,Where,Info

Action
    Displays the type of Action that took place.

Actor
    Displays the Actor to generate a transaction.

Info
    Displays details of the transaction.

TimeStamp
    Displays when the transaction occurred.

Where
    Displays details of the constraints for the transaction.

NOTE: If using the WithAssoc option you can also view the information about the various associations the transaction affected. The Association format fields are described in the LIST/SHOW ASSOCIATION FORMAT OPTIONS section.

SPECIFICATIONS FOR USERS

Users can be created, modified, and deleted with sacctmgr. These options allow you to set the corresponding attributes or filter on them when querying for Users.

It is important to recognize the difference between a User and an Association. There is a User entity that exists for each unique username. However, there can be multiple User Associations for the same User. The combination of a Cluster, Account, User, and optionally a Partition constitute a User Association. When adding an existing User to another Account, you are creating an additional User Association rather than modifying an existing User.

Account=<account>
    Account name to add this user to.

AdminLevel=<level>
    Admin level of user. Valid levels are None, Operator, and Admin.

Cluster=<cluster>
    Specific cluster to add user to the account on. Default is all in system.

DefaultAccount=<account>
    Identify the default account name to be used for a job if none is specified at submission time.

DefaultWCKey=<defaultwckey>
    Identify the default Workload Characterization Key.

Name=<name>
    Name of user.

NewName=<newname>
    Use to rename a user in the accounting database

Partition=<name>
    Partition name.

NOTE: See also Partitions listed in the SPECIFICATIONS FOR ASSOCIATIONS section.

RawUsage=<value>
    This allows an administrator to reset the raw usage accrued to a user. The only value currently supported is 0 (zero). This is a settable specification only - it cannot be used as a filter to list users.

WCKeys=<wckeys>
    Workload Characterization Key values.

WithAssoc
    Display all associations for this user.

WithCoord
    Display all accounts a user is coordinator for.

WithDeleted
    Display information with previously deleted data. Users that are deleted within 24 hours of being created and did not have a job run by the user during that time will be removed from the database. Otherwise, the user will be marked as deleted and will be viewable with the WithDeleted flag.

NOTE: If using the WithAssoc option you can also query against association specific information to view only certain associations this user may have. These extra options can be found in the SPECIFICATIONS FOR ASSOCIATIONS section. You can also use the general specifications list above in the GENERAL SPECIFICATIONS FOR ASSOCIATION BASED ENTITIES section.

LIST/SHOW USER FORMAT OPTIONS

Fields you can display when viewing User records by using the format= option. The default format is:
User,DefaultAccount,DefaultWCKey,AdminLevel

AdminLevel
    Admin level of user.

Coordinators
    List of users that are a coordinator of the account. (Only filled in when using the WithCoordinator option.)

DefaultAccount
    The user's default account.

DefaultWCKey
    The user's default wckey.

User
    The name of a user.

NOTE: If using the WithAssoc option you can also view the information about the various associations the user may have on all the clusters in the system. The association information can be filtered. Note that all the users in the database will always be shown as filter only takes effect over the association data. The Association format fields are described in the LIST/SHOW ASSOCIATION FORMAT OPTIONS section.

LIST/SHOW WCKey

Fields you can display when viewing WCKey records by using the format= option. The default format is:
WCKey,Cluster,User

Cluster
    Specific cluster for the WCKey.

ID  The ID of the WCKey.

User
    The name of a user for the WCKey.

WCKey
    Workload Characterization Key.

WithDeleted
    Display information with previously deleted data. WCKeys that are deleted within 24 hours of being created and did not have a job run with the WCKey during that time will be removed from the database. Otherwise, the WCKey will be marked as deleted and will be viewable with the WithDeleted flag.

LIST/SHOW TRES

Fields you can display when viewing TRES records by using the format= option. The default format is:
Type,Name,ID

ID  The identification number of the trackable resource as it appears in the database.

Name
    The name of the trackable resource. This option is required for TRES types BB (Burst buffer), GRES, and License. Types CPU, Energy, Memory, and Node do not have Names. For example if GRES is the type then name is the denomination of the GRES itself e.g. GPU.

Type
    The type of the trackable resource. Current types are BB (Burst buffer), CPU, Energy, GRES, License, Memory, and Node.

TRES information
Trackable RESources (TRES) are used in many QOS or Association limits (GrpTRES* / MaxTRES*). When setting limits, one or more comma-separated "TRES=value" assignments can be specified. Each TRES can be one of the Slurm defaults (e.g., cpu, mem, node), or any defined generic resource. You can see the list of available resources by running sacctmgr show tres. Each TRES has a different limit, e.g., "GrpTRES=cpu=16,mem=32G" would establish 2 different limits: one for 16 CPUs and another for 32 GiB of memory. Setting a new value for a TRES type does not affect any other TRES types that were previously specified. For example, on the same entity as above, a subsequent assignment of "GrpTRES=gres/gpu=2" will result in "GrpTRES=cpu=16,mem=32G,gres/gpu=2" applying to that entity. To remove a limit, assign -1 to the TRES type whose limit should be removed, e.g., "GrpTRES=cpu=-1" would remove only the cpu TRES limit, resulting in "GrpTRES=mem=32G,gres/gpu=2" on that entity. Starting in Slurm 26.05, a TRES assignment can use a += or -= operator to add to or remove from the previously set value for that TRES, e.g., "GrpTRES=mem-=8G,gres/gpu+=2" would result in "GrpTRES=mem=24G,gres/gpu=4" on that entity. NOTE: When dealing with Memory as a TRES the default units are MiB. A suffix of G, T, or P can be added to specify a limit in larger units. NOTE: The Billing TRES is calculated from a partition's TRESBillingWeights. It is temporarily calculated during scheduling for each partition to enforce billing TRES limits. The final Billing TRES value is calculated after the job has been allocated resources and can be seen in scontrol show jobs and sacct output.

GLOBAL FORMAT OPTION
When using the format option for listing various fields you can put a %NUMBER afterwards to specify how many characters should be printed. e.g. format=name%30 will print 30 characters of field name right justified. A -30 will print 30 characters left justified.

FLAT FILE DUMP AND LOAD
sacctmgr has the capability to load and dump Slurm association data to and from a file. This method can easily add a new cluster or copy an existing cluster's associations into a new cluster with similar accounts. Each file contains Slurm association data for a single cluster. Beginning with version 25.05, QOS information is included in the dump file. Comments can be put into the file with the # character. Each line of information must begin with one of the five titles; QOS, Cluster, Parent, Account or User. Following the title is a space, dash, space, entity value, then specifications. Specifications are colon-separated. If any variable, such as an Organization name, has a space in it, surround the name with single or double quotes.

sacctmgr dump/load must be run as a Slurm administrator or root. If using sacctmgr load on a database without any associations, it must be run as root (because there aren't any users in the database yet).

  dump
Dump cluster associations from the database into a file. If no file is given then one will be generated, using the cluster name for the file name. That file will be created in the current working directory.

To create a file with the association information you can run:
sacctmgr dump tux file=tux.cfg

    Cluster=
        Specify the cluster to dump the information for.

    File=
        Specify a file to save flat file data to. If the filename is not specified it uses clustername.cfg filename by default.

  load
Load cluster associations into the database. The imported associations will be reconciled with existing ones.

To load a previously created file you can run:
sacctmgr load file=tux.cfg

    clean
        Delete what was already there and start from scratch with this information. With no options this will only remove the cluster along with it's associations. No accounts, users, or QOS will be removed. This also accepts a comma-separated list of other options to remove. Those include 'account', 'qos' and 'user'. If you would like to remove accounts, qos, and users along with the cluster and associations give the input of clean=account,qos,user.

    Cluster=
        Specify a different name for the cluster than that which is in the file.

    File=
        Specify a flat file to load from.

SPECIFICATIONS FOR FLAT FILE
Since the associations in the system follow a hierarchy, so does the file. Anything that is a parent needs to be defined before any children. The only exception is the understood 'root' account. This is always a default for any cluster and does not need to be defined. To edit/create a file start with a cluster line for the new cluster:
Cluster - cluster_name:MaxTRESPerJob=node=15
Anything included on this line will be the default for all associations on this cluster. The options for the cluster are:

    FairShare=
        Allocated shares used for fairshare calculation.

    GrpJobs=
        Maximum number of running jobs in aggregate for this association and its children.

    GrpJobsAccrue=
        Maximum number of pending jobs in aggregate able to accrue age priority for this association and its children.

    GrpNodes=
        This option has been deprecated in favor of the more versatile TRES. Equivalent limit definition is now GrpTRES=node=#.

    GrpSubmitJobs=
        Maximum number of jobs in a pending or running state at any time in aggregate for this association and its children.

    GrpTRES=
        Maximum number of TRES able to be allocated by running jobs in aggregate for this association and its children.

    GrpTRESMins=
        Maximum number of TRES minutes that can possibly be used by past, present and future jobs in this association and its children.

    GrpTRESRunMins=
        Maximum number of TRES minutes able to be allocated by running jobs in this association and its children. This takes into consideration time limit of running jobs and consumes it. If the limit is reached no new jobs are started until other jobs finish to allow time to free up.

    GrpWall=
        Maximum wall clock time able to be allocated by running jobs in aggregate in this association and its children.

    MaxJobs=
        Maximum number of running jobs per user in this association.

    MaxTRESPerJob=
        Maximum number of TRES each job can use in this association.

    MaxWallDurationPerJob=
        Maximum wall clock time each job can use in this association.

    QOS=
        Comma-separated list of Quality of Service names (Defined in sacctmgr).

After the entry for the root account you will have entries for the other accounts on the system. The entries will look similar to this example:
Parent - root
Account - cs:MaxTRESPerJob=node=5:MaxJobs=4:FairShare=399:MaxWallDurationPerJob=40:Description='Computer Science':Organization='LC'
Parent - cs
Account - test:MaxTRESPerJob=node=1:MaxJobs=1:FairShare=1:MaxWallDurationPerJob=1:Description='Test Account':Organization='Test'
Any of the options after a ':' can be left out and they can be in any order. If you want to add any sub accounts just list the Parent THAT HAS ALREADY BEEN CREATED before the account you are adding. Account options are:

    Description=
        A brief description of the account.

    FairShare=
        Number used in conjunction with other associations to determine job priority.

    GrpTRES=
        Maximum number of TRES able to be allocated by running jobs in aggregate for this association and its children.

    GrpTRESMins=
        Maximum number of TRES minutes that can possibly be used by past, present, and future jobs in this association and its children.

    GrpTRESRunMins=
        Maximum number of TRES minutes able to be allocated by running jobs in this association and its children. This takes into consideration time limit of running jobs and consumes it. If the limit is reached no new jobs are started until other jobs finish to allow time to free up.

    GrpJobs=
        Maximum number of running jobs in aggregate for this association and its children.

    GrpJobsAccrue=
        Maximum number of pending jobs in aggregate able to accrue age priority for this association and its children.

    GrpNodes=
        This option has been deprecated in favor of the more versatile TRES. Equivalent limit definition is now GrpTRES=node=#.

    GrpSubmitJobs=
        Maximum number of jobs in a pending or running state at any time in aggregate for this association and its children.

    GrpWall=
        Maximum wall clock time able to be allocated by running jobs in aggregate in this association and its children.

    MaxJobs=
        Maximum number of running jobs per user in this association.

    MaxNodesPerJob=
        Maximum number of nodes per job in this association.

    MaxWallDurationPerJob=
        Maximum wall clock time each job can use in this association.

    Organization=
        Name of organization that owns this account.

    QOS(=,+=,-=)
        Comma-separated list of Quality of Service names (Defined in sacctmgr).
To add users to an account add a line after the Parent line, similar to this:
Parent - test
User - adam:MaxTRESPerJob=node:2:MaxJobs=3:FairShare=1:MaxWallDurationPerJob=1:AdminLevel=Operator:Coordinator='test'
User options are:

    AdminLevel=
        Type of admin this user is (Administrator, Operator)
        Must be defined on the first occurrence of the user.

    Coordinator=
        Comma-separated list of accounts this user is coordinator over
        Must be defined on the first occurrence of the user.

    DefaultAccount=
        System wide default account name
        Must be defined on the first occurrence of the user.

    FairShare=
        Number used in conjunction with other associations to determine job priority.

    MaxJobs=
        Maximum number of running jobs from this user.

    MaxTRESPerJob=
        Maximum number of TRES each job from this user can use.

    MaxWallDurationPerJob=
        Maximum wall clock time each job from this user can use.

    QOS(=,+=,-=)
        Comma-separated list of Quality of Service names (Defined in sacctmgr).

ARCHIVE FUNCTIONALITY
Sacctmgr has the capability to archive to a flatfile and or load that data if needed later. The archiving is usually done by the slurmdbd and it is highly recommended you only do it through sacctmgr if you completely understand what you are doing. For slurmdbd options see "man slurmdbd" for more information. Loading data into the database can be done from these files to either view old data or regenerate rolled up data. For information about configuring an archive server see <https://slurm.schedmd.com/accounting.html#archive>.

  archive dump
Dump accounting data to file. Data will not be archived unless the corresponding purge option is included in this command or in slurmdbd.conf. This operation cannot be rolled back once executed. If one of the following options is not specified when sacctmgr is called, the value configured in slurmdbd.conf is used.

    Directory=
        Directory to store the archive data.

    Events
        When purging events also archive them. Default is to permanently delete purged records.

    Jobs
        When purging jobs also archive them, including scripts and environments. Default is to permanently delete purged records.

    JobScript
        When purging job scripts also archive them. Default is to follow Jobs.

    JobEnv
        When purging job environments also archive them. Default is to follow Jobs.

    PurgeEventAfter=
        Purge cluster event records older than the stated time. Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeJobAfter=
        Purge individual job records older than the stated time (based on end time). Aggregated information will be preserved to "PurgeUsageAfter". Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours. NOTE: this includes job scripts and job environments if their specific purge options (PurgeJobScriptAfter and PurgeJobEnvAfter) are not set.

    PurgeJobScriptAfter=
        Purge job script records older than the stated time (based on end time). Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeJobEnvAfter=
        Purge job environment records older than the stated time (based on end time). Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeResvAfter=
        Purge reservation records older than the stated time (based on end time). Aggregated information will be preserved to "PurgeUsageAfter". Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeStepAfter=
        Purge step records older than the stated time (based on end time). Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeSuspendAfter=
        Purge job suspend records older than the stated time. Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeTXNAfter=
        Purge transaction records older than the stated time. Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    PurgeUsageAfter=
        Purge usage records (Cluster, Association, QOS and WCKey) older than the stated time (based on creation or last modified time). These tables are the source for reports generated by the sreport(1) command. Units are months (default), days, or hours. For example, a value of "12hours" would purge all such records older than 12 hours.

    Reservations
        When purging reservations also archive them. Default is to permanently delete purged records.

    Script=
        Run this script instead of the generic form of archive to flat files.

    Steps
        When purging steps also archive them. Default is to permanently delete purged records.

    Suspend
        When purging suspend records also archive them. Default is to permanently delete purged records.

    TXN When purging transaction records also archive them. Default is to permanently delete purged records.

    Usage
        When purging usage records also archive them. Default is to permanently delete purged records.

  archive load
Load in to the database previously archived data. The archive file will not be loaded if the records already exist in the database - therefore, trying to load an archive file more than once will result in an error. When this data is again archived and purged from the database, if the old archive file is still in the directory ArchiveDir, a new archive file will be created (see ArchiveDir in the slurmdbd.conf man page), so the old file will not be overwritten and these files will have duplicate records.

Archive files from the current or any prior Slurm release may be loaded through archive load.

    File=
        File to load into database. The specified file must exist on the slurmdbd host, which is not necessarily the machine running the command.

    Insert=
        SQL to insert directly into the database. This should be used very cautiously since this is writing your sql into the database.

PERFORMANCE

Executing sacctmgr sends a remote procedure call to slurmdbd. If enough calls from sacctmgr or other Slurm client commands that send remote procedure calls to the slurmdbd daemon come in at once, it can result in a degradation of performance of the slurmdbd daemon, possibly resulting in a denial of service.

Do not run sacctmgr or other Slurm client commands that send remote procedure calls to slurmdbd from loops in shell scripts or other programs. Ensure that programs limit calls to sacctmgr to the minimum necessary for the information you are trying to gather.

ENVIRONMENT VARIABLES

Some sacctmgr options may be set via environment variables. These environment variables, along with their corresponding options, are listed below. (Note: Command line options will always override these settings.)

SLURM_CONF
    The location of the Slurm configuration file.

SLURM_DEBUG_FLAGS
    Specify debug flags for sacctmgr to use. See DebugFlags in the slurm.conf(5) man page for a full list of flags. The environment variable takes precedence over the setting in the slurm.conf.

SLURM_JSON
    Control JSON serialization:

    compact
        Output JSON as compact as possible.

    pretty
        Output JSON in pretty format to make it more readable.

SLURM_YAML
    Control YAML serialization:

    compact Output YAML as compact as possible.

    pretty Output YAML in pretty format to make it more readable.

EXAMPLES
NOTE: There is an order to set up accounting associations. You must define clusters before you add accounts and you must add accounts before you can add users.
$ sacctmgr create cluster tux
$ sacctmgr create account name=science fairshare=50
$ sacctmgr create account name=chemistry parent=science fairshare=30
$ sacctmgr create account name=physics parent=science fairshare=20
$ sacctmgr create user name=adam cluster=tux account=physics fairshare=10
$ sacctmgr delete user name=adam cluster=tux account=physics
$ sacctmgr delete user name=adam cluster=tux account=science partition=\"\"
$ sacctmgr delete account name=physics cluster=tux
$ sacctmgr modify user where name=adam cluster=tux account=physics set maxjobs=2 maxwall=30:00
$ sacctmgr add user brian account=chemistry
$ sacctmgr list associations cluster=tux format=Account,Cluster,User,Fairshare tree withd
$ sacctmgr list transactions Action="Add Users" Start=11/03-10:30:00 format=Where,Time
$ sacctmgr dump cluster=tux file=tux_data_file
$ sacctmgr load tux_data_file
A user's account can not be changed directly. A new association needs to be created for the user with the new account. Then the association with the old account can be deleted. When modifying an object placing the key words 'set' and the optional 'where' is critical to perform correctly below are examples to produce correct results. As a rule of thumb anything you put in front of the set will be used as a quantifier. If you want to put a quantifier after the key word 'set' you should use the key word 'where'. The following is wrong:
$ sacctmgr modify user name=adam set fairshare=10 cluster=tux
This will produce an error as the above line reads modify user adam set fairshare=10 and cluster=tux. Either of the following is correct:
$ sacctmgr modify user name=adam cluster=tux set fairshare=10
$ sacctmgr modify user name=adam set fairshare=10 where cluster=tux
When changing qos for something only use the '=' operator when wanting to explicitly set the qos to something. In most cases you will want to use the '+=' or '-=' operator to either add to or remove from the existing qos already in place. If a user already has qos of normal,standby for a parent or it was explicitly set you should use qos+=expedite to add this to the list in this fashion. If you are looking to only add the qos expedite to only a certain account and or cluster you can do that by specifying them in the sacctmgr line.
$ sacctmgr modify user name=adam set qos+=expedite
or
$ sacctmgr modify user name=adam acct=this cluster=tux set qos+=expedite
Let's give an example how to add QOS to user accounts. List all available QOSs in the cluster.
$ sacctmgr show qos format=name
       Name
  ---------
     normal
   expedite
List all the associations in the cluster.
$ sacctmgr show assoc format=cluster,account,qos
   Cluster     Account                  QOS
  --------  ---------- --------------------
     zebra        root               normal
     zebra        root               normal
     zebra           g               normal
     zebra          g1               normal
Add the QOS expedite to account G1 and display the result. Using the operator += the QOS will be added together with the existing QOS to this account.
$ sacctmgr modify account name=g1 set qos+=expedite
$ sacctmgr show assoc format=cluster,account,qos
   Cluster     Account                  QOS
  --------  ---------- --------------------
     zebra        root               normal
     zebra        root               normal
     zebra           g               normal
     zebra          g1      expedite,normal
Now set the QOS expedite as the only QOS for the account G and display the result. Using the operator = that expedite is the only usable QOS by account G
$ sacctmgr modify account name=G set qos=expedite
$ sacctmgr show assoc format=cluster,account,qos
   Cluster     Account                  QOS
  --------  ---------- --------------------
     zebra        root               normal
     zebra        root               normal
     zebra           g             expedite
     zebra          g1      expedite,normal
If a new account is added under the account G it will inherit the QOS expedite and it will not have access to QOS normal.
$ sacctmgr add account banana parent=G
$ sacctmgr show assoc format=cluster,account,qos
   Cluster     Account                  QOS
  --------  ---------- --------------------
     zebra        root               normal
     zebra        root               normal
     zebra           g             expedite
     zebra      banana             expedite
     zebra          g1      expedite,normal
An example of listing trackable resources:
$ sacctmgr show tres
      Type              Name      ID
---------- ----------------- --------
       cpu                          1
       mem                          2
    energy                          3
      node                          4
   billing                          5
      gres         gpu:tesla     1001
   license               vcs     1002
        bb              cray     1003

COPYING
Copyright (C) 2008-2010 Lawrence Livermore National Security. Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
Copyright (C) 2010-2022 SchedMD LLC.

This file is part of Slurm, a resource management program. For details, see <https://slurm.schedmd.com/>.

Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

SEE ALSO
slurm.conf(5), slurmdbd(8)